E-procurement

Ecrous DIN 6330 M14 A2 - 40 000 pcs

Vis pour châssis de fenêtre tête cylindrique, torx30 7,5x372 zinc (vis à béton)

EXW, CIF Alexandrie, Egypte. Date limite d'envoi du devis : 21 NOV.

Lieferung in den nächsten 14 Tagen

Délai de livraison maximum avant Noël

Merci de citer également les rondelles ISO 7089 min 140 HV HDG, mêmes dimensions

DIN 912 M3x12 12,9 - 500 000 pcs
DIN 315 M4 zinc amer.type - 452 000 pcs
DIN 912 M3x18 8,8 zinc- 1 000 000 pcs
DIN 912 M3x8 8,8 zinc - 1 000 000 pcs
DIN 7985 M3x45 4,8 zinc PH1 - 500 000 pcs
DIN 1440 M4 zinc- 200 000 pcs

5 pièces mesurées avec EMPB conformément à VDA. CoC avec chaque livraison Fiche de données matérielles avec informations sur la date de péremption et le revêtement.

Revêtement KLF selon DIN 267 partie 28.

Bonjour. Nous recherchons des vis autotaraudeuses.
100.000 pcs en inox A2. Solution spéciale pour l'industrie du profilé alu.
Taille 3,9x16 et partie non filetée sous la tête. Diamètre de la tête 7,5 mm tête cylindrique Torx 15 drive.

Vis à tête cylindrique cruciforme M6x30 Pozydriver ISO 7048 ou Philips Inox A-70 50 pièces ou quantité minimale de commande

très urgent

Bonjour, nous souhaitons recevoir une offre pour les colliers de serrage.

- Collier de serrage à manchon en acier inoxydable 316L (1.4404) - 106 pièces

- Collier de serrage à manchon en acier inoxydable 318 (1.4462 ou S31803) - 106 pièces

Diamètre intérieur d189

Diamètre extérieur d198

30 000 pièces/lot.

Le matériau est de l'acier au carbone.

Nous avons besoin d'un couple d'au moins 12,7 N·m.

STUD BOLT 1" X 140 MM C/W NUTS H=D & 316SS WASHERS

150 units

DAP FRANCE

- BOULON : GOUJON 3/4 IN DIA 10 UNC, 4-3/4 IN THD LG CR MOLY, SA193, GR B7, AVEC 2 ÉCROUS HEXAGONAUX, SA194 2H, 130-VD-109/209.
("Note : Cet article doit être testé et enregistré par le PMI. En cas de réussite, des marquages et une documentation conformes à la spécification du PMI sont requis").
Fabricant (MA)
- Numéro de pièce MIS (VN)
- 002-302-171

Quantité : 19

Pièces Veuillez également indiquer le poids, les dimensions et le délai de livraison estimés pour l'article.

Nous recherchons un pied réglable avec une plaque de base, diamètre 83 mm.
Y compris un patin antidérapant, filetage M16×175 ou M16×190, zingage blanc.
Tous les composants sont assemblés.

1) SAFETY WASHER ( SCHNORR TYPE ) M-8 - S TYPE - INOX A2 - 3,000 PCS

2) SAFETY WASHER ( SCHNORR TYPE ) M-16 - S TYPE - INOX A2 - 3,000 PCS

3) SAFETY WASHER ( SCHNORR TYPE ) M-8 - S TYPE - INOX A4 - 3,000 PCS

4) SAFETY WASHER ( SCHNORR TYPE ) M-16 - S TYPE - INOX A4 - 3,000 PCS

5) DIN 472 CIRCLIP 62 X 2 - Material 1.4122 - 2000 PCS

PIN 3m6 x 12 ISO8734 500 000 pièces PIN FI 2,5m6 x 10 ISO 500 000 pièces

Nous comprenons que la plupart des fournisseurs ne disposent pas de cette quantité en stock, mais nous sommes convaincus de pouvoir obtenir un devis indiquant le nombre d'unités disponibles et le délai de livraison correspondant.

Nous sommes distributeur en Roumanie, pour les ARTICLES DIN ISO. Nous avons besoin d'un fournisseur pour ces articles. Il en aura besoin régulièrement.

24 sets of: 1-1/8" dia x 7-1/2" L, ASTM A193 GR B7 Studs / A194 Gr 2H Heavy Hex Nuts

Boulons hexagonaux LN 29522-S06048 Quantité : 100 / 250 / 500 / 1000

We need a product as specified in the attached image.
All the dimensions and tolerances are standard, except for the dimension of the diagonal of the square neck (i have called it "h" in the image).

We need the diagonal of the square neck to be between 6,1 mm and 6,5 mm.

From our experience some batches already match this requirement, we request a simple check on the batch before sending it out, there should be no need for special production.

We need 8000 units as soon as possible, and we will need 40000 in 2026.




 

To be delivered in one lot, no later than January /2026. Please send earliest quotation with delivery term Free warehouse at Helsinki, Finland or ex-work your location.
 

Please include unit price, lead time, payment terms, and shipping cost.

Demande de conformité ASTM - Veuillez indiquer un prix incluant la livraison au Royaume-Uni.

PLEASE QUOTE NAS509-08C 150

Ring bolts 101405 RM M20 DIN582 C35E VERZ. 101401 RM M16 DIN582 C35E VERZ. Material Specification: C35E+N (1.1181+N)

Dimensions according to DIN 582

Mechanical Specification EN 10269 Pressure Equipment Directive-Approval Quantity 2000 pcs.

Each Preferred Incoterms: DAP

Please see the attachment and quote you best price for the same.

Price Basis: CIF Dammam Seaport or DDU Riyadh, Saudi Arabia.

Washer
Inside diameter : M25
Material : NYLON
Type : FOR CABLE-GLAND
USE: ENTRANCE CORRIDOR OF FREEFALL LIFE BOAT
Manufacturer Part No : DASW-M25
Manufacturer : DONG-A BESTECH

9 pieces.

Vis à tête cylindrique à six pans creux ISO 7379 à épaulement ISO 7379 A2 ou A4 3000 M8x25 ISO7379 A2 ou A4

Devis pour une livraison annuelle de 300 000 pièces

WE ARE LOOKING FOR A SUPPLY EX STOCK (OR WITHIN A MAXIMUM OF 2-3 WEEKS)

Vis à souder M6 L=16 en acier inoxydable A2 1.4301/1.4303/1.4306 DIN 34817, A2-70 décapé. Environ 150 000 pièces sont nécessaires. Vis à souder selon DIN 34817 M6 x 16 - 1.4301 A2-70. Taric : 73181595. Dessin : DIN 34817. Merci.

We required M12x55 Threaded pin A2-70 grade DIN 914 standard

Vis à tête fraisée cylindrique DIN 792, acier 8.8, M30 x 130, 20 pièces. Remarques :

it must be with certificate 2.2 according to DS/EN 10204

DIN 1478
M56
HDG
20 pièces

DIN 6921, avec denture, Gr.8.8, Zinc, M10x16 - 10 000 pcs.
DIN 7500D, M8x16, lisse - 10 000 pcs.

J'ai un délai de livraison court (2-3 semaines), je préfère donc un fournisseur européen.

Screw Pan Head, Size M3,5x16, Norm ISO 14583, Grade 8.8, Surface treatment Fe/Zn5 - 3 000 pcs urgent samples
Screw Pan Head, Size M3,5x16, Norm ISO 14583, Grade 8.8, Surface treatment Fe/Zn5 - 145 000 pcs production order
Screw Pan Head, Size M3,5x16, Norm ISO 14583, Grade 8.8, Surface treatment P3E - 3 000 pcs urgent samples
Screw Pan Head, Size M3,5x16, Norm ISO 14583, Grade 8.8, Surface treatment P3E - 145 000 pcs production order

BONJOUR, NOUS RECHERCHONS CES PRODUITS POUR LE COMPTE D'UN DE NOS CLIENTS. MERCI DE NOUS FAIRE PARVENIR UNE OFFRE ET LES DELAIS DE LIVRAISON. NOUS VOUS REMERCIONS.

NOUS RECHERCHONS UN FOURNISSEUR EUROPÉEN OU ITALIEN. DÉLAI DE LIVRAISON JUSQU'À 30/40 JOURS

DIN 963 M8x55, acier C45 Volume annuel : 90 000 pièces, livraisons mensuelles : 15 000/30 000 et 45 000 pièces DIN 963 M8x55 Tableau

M6 Round Cage Nuts (T 410 SERIES) 

If this order proceeds successfully, we anticipate ongoing and higher-volume orders in the future.

Item: Round Cage Nut

Size: M6

Quantity: 1,000 pcs

Please include the following details in your quotation: Unit price and total cost Whether shipping to Ontario is included Estimated delivery time Separate shipping charges (if applicable) Available bulk order discounts (if any) Additionally, we are interested in exploring the opportunity to become an authorized distributor for your products in both India and Canada.

Kindly share the process, eligibility criteria, and requirements for distributor registration.

AIRCRAFT PINS

NOUS RECHERCHONS UN DES DEUX ARTICLES, SOIT M18 OU M20, EN LAITON. NOUS POUVONS ATTENDRE JUSQU'À 2 SEMAINES. POUR LES FOURNISSEURS EUROPÉENS OU ITALIENS.

Demande LM000055421

1 2892997 "STUD BOLT - 1 3/4""-8UN x L28.94"" (L735), ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated, w/2 washers per PIM-SU-5300 TABLE 4. (End User Ref: SET 2, Series 3 for PCP)" 150 Each 2 2892998 "STUD BOLT - 1-1/4"" x 8-1/2"" LG, ASTM A193-B7 W/A194-2H HVY HEX NUTS, BLUE XYLAN 1424 COATED (End User Ref: SET 2, Series 3 for PCP)" 16 Each 3 2892999 "STUD BOLT - 1-1/4""x 9"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated (End User Ref: SET 2, Series 3 for PCP)" 40 Each 4 2893000 "STUD BOLT - 1-1/8"" x 7"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated (End User Ref: SET 2, Series 3 for PCP)" 32 Each 5 2893001 "STUD BOLT - 1-1/8"" x 8"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated (End User Ref: SET 2, Series 3 for PCP)" 216 Each 6 2893002 "STUD BOLT - 1-3/4"" x 12-1/2"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated per PIM-SU-5300 TABLE 4 (End User Ref: SET 2, Series 3 for PCP)" 56 Each 7 2893003 "STUD BOLT - 1-3/4"" x 14-1/2"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated per PIM-SU-5300 TABLE 4 (End User Ref: SET 2, Series 3 for PCP)" 28 Each 8 2893004 "STUD BOLT - 1-5/8"" x 11-1/2"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated (End User Ref: SET 2, Series 3 for PCP)" 24 Each 9 2893005 "STUD BOLT - 1-5/8""-8UN x L24.21"" (L715), ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated, w/2 washers (End User Ref: SET 2, Series 3 for PCP)" 142 Each 10 2893006 "STUD BOLT - 1-5/8""-8UN x L28.15"" (L715), ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated, w/2 washers (End User Ref: SET 2, Series 3 for PCP)" 150 Each 11 2893007 "STUD BOLT - 1-7/8"" x 13"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated (End User Ref: SET 2, Series 3 for PCP)" 48 Each 12 2893008 "STUD BOLT- 1-1/2"" x 10"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated (End User Ref: SET 2, Series 3 for PCP)" 116 Each 13 2893009 "STUD BOLT- 1-1/2"" x 12"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated (End User Ref: SET 2, Series 3 for PCP)" 16 Each 14 2893010 "STUD BOLTS - 1.1/2"" x 13 1/4"" LG Stud, ASTM A193 Gr. L7 stud w/2 heavy hex nuts ASTM A194 Gr. 7, Blue, Xylan 1424 Coated per PIM-SU-5300-EX-LA-SAS, Table 4 (End User Ref: SET 2, Series 3 for PCP)" 64 Each 15 2893011 "STUD BOLTS - 1.1/4"" x 8"" LG, ASTM A193 Gr. B7 stud w/2 ASTM A194 Gr. 2H Heavy Hex Nuts, No Coated per PIM-SU-5300, Table 4 (End User Ref: SET 2, Series 3 for PCP)" 40 Each 16 2893012 "STUD BOLT - 1-1/8"" x 9"", ASTM A193 GR B7 Studs w/2 ASTM A194 GR 2H Heavy Hex Nuts, BLUE, Xylan 1424 Coated (End User Ref: SET 2, Series 3 for PCP)" 24 Each

3.1 certificates are required for European material compliant with PED and, if available, a food compliance declaration (non-binding).

We request to preview the certificate. 

Dear Sir, Kindly quote for the item described below in PDF format. STUD BOLT: 3/4 IN DIA 5-3/4 INLG TEFLON COATED GR B7 2 NUTS QUANTITY: 30 Each BEST REGARDS

Spinning Flare Nut PEM SFN-M6-00ZI

 

Enquiry
DIN 404 5,8 zincplated M 5x10 7000pcs

SEE ATTACHMENT

Materials consumables

1 2 rolls Isotherm 800 glass clothes 50mmx4mm 2 rolls 2 1 pkt Rivest fixing stainless 4mm thick 1 pkt/ 500pcs 3 5 pkts Stainless drill bits 4mm thick 5pkts/30pcs 4 1 pkt Stainless screw nails star 4mm thick 1pkt/100pcs 5 1/2 roll Stainless wire ½ rll 6 1/2 pkt Rough sandpaper = 1 pkt ( ½ each) 7 1/2 pkt Smooth sandpaper 8 2 pcs Stainless wire brush = 2pcs

Hand tools

1 1 set Corrugated nibbler -1 set 2 1 set Plain nibbler = 1 set 3 3 pcs Scrapper / matoler = 3pcs 4 2 pcs Insulation cutters original, left = 2pcs 5 2 pcs Insulation cutters original, right = 2pcs 6 2 pcs Insulation cutters original, straight =2pcs 7 4 pcs Grippling pliers/ spanner 4pcs 8 2 pcs Cutting 2pcs 9 2 set Battery drilling machine =2sets 10 2 set Rivert machine – 2set 11 2 pcs Marlet hammer = 2pcs 12 4 pcs Screwdriver star =4pcs 13 2 set Saw frames and blades = 2set 14 2 pcs Taping hammer =2pcs 15 2 pcs Tape rule = 2pcs 16 1 set Insulation tools box = 1 set 

1️⃣ GASKET:SPIRAL WOUND; MAKE:TBA, PART NUMBER:AG0442M-AC-S04D, TYPE:TBA,INSIDE DIAMETER:675, INSIDE DIAMETER_UOM:MM, OUTSIDE#DIAMETER:695, OUTSIDE DIAMETER_UOM:MM, THICKNESS:4.5, THICKNESS_UOM:MM,FILLER MATERIAL:GRAPHITE, WINDING MATERIAL:316 STAINLESS#STEEL, INNER RING MATERIAL:STAINLESS STEEL, ADDITIONAL FEATURES:SIZE:746MM 2️⃣ GASKET; MAKE:TBA, PART NUMBER:941465-F-M130, TYPE:TBA,MATERIAL:REINFORCED TANGED GRAPHITE INSERT, ADDITIONAL FEATURES:OBLONG#SHAPE, WD 205 X LG 445 MM 3️⃣ GASKET:SPIRAL WOUND; MAKE:TBA, PART NUMBER:AG0442M-N-S04D, TYPE:TBA,NOMINAL SIZE:18, NOMINAL SIZE_UOM:IN, INSIDE DIAMETER:518,#INSIDE DIAMETER_UOM:MM, OUTSIDE DIAMETER:535, OUTSIDE DIAMETER_UOM:MM,THICKNESS:5, THICKNESS_UOM:MM, FILLER MATERIAL:GRAPHITE,#WINDING MATERIAL:316 STAINLESS STEEL, INNER RING MATERIAL:STAINLESSSTEEL, ADDITIONAL FEATURES:SIZE:572 MM, 18IN, BONNET

Nous recherchons des fournisseurs et des fabricants de goujons et d'écrous pour des projets industriels à venir.

Goujons ASTM A193 B7/B8 ou équivalent

Écrous hexagonaux lourds STM A194 ou équivalent

Nous aimerions recevoir : Catalogues/spécifications des produits, quantités minimales de commande, délais de livraison, conditions d'exportation vers l'Irak, offres de prix pour les commandes en gros Certifications (par ex. ISO, MTC, etc.)

Nous recherchons un fournisseur de tiges filetées. Ceci est la quantité pour six mois. Nous utilisons régulièrement cette dimension et d'autres.

Nous recherchons des vis pour aggloméré à tête cylindrique, POZI. Elles doivent être zinguées bleu et, de préférence, dotées d'un trou plus profond pour le vissage mécanique.

Veuillez consulter les demandes de renseignements ci-jointes (plusieurs feuilles)
Fixations ASTM avec filetage UNC

Projet destiné au Canada

HELICOIL INSERTS F103CNX6

Please offer me 100-300pcas, ASAP delivery

The items are ready for fulfillment, we are looking for urgent delivery preferably

DIN 603 A2-70 M 16X200 Mushroom head square neck bolts, partial thread Thread length (b) 44 mm - 175 pcs

DÉLAI DE 5 SEMAINES MAXIMUM

VIS DIN 912 OU UNI 5932 12.9 BRUTE À PAS FIN

Ø 56 x PAS DE 4 MM X 240 MM DE LONG

Hello, Please send me a quote for the following items Part number Description QTY NTA11169-14HK51 BOLT 1 S0001004520300 BOLT 1 BACB30MR14HK51 BOLT 1 S5387300021602 STRIP, LIGHTNIN Alt S5387300021600 Alt S5387300021601 1 S5387300021802 STRIP, LIGHTNIN ALT P/N S5387300021801, ALT P/N S5387300021800 2

Nous sommes une entreprise basée à Barcelone, en Espagne, et nous utilisons un système Bin Whip (Pneumat – Dual Impact BinWhip, Dual Impact BinWhip – Pneumat Systems, Inc.).

Pour cet équipement, nous avons besoin de chaînes en bronze (et non en bronze plaqué, mais en bronze massif).

Pourriez-vous nous indiquer si vous : - fournissez déjà des chaînes en bronze ? - pouvez-vous les fabriquer sur demande ? T

See attachment

Veuillez indiquer votre meilleur prix pour la fourniture du boulon mécanique, décrit dans le fichier ci-joint, CIF Alexandrie, Égypte. Date limite de soumission du devis : 20 septembre.

Entretoise à souder. Dimensions estimées : D = 12 mm L = 44,50 mm DK = 20 mm


Nous concourons pour un nouveau projet pour l'industrie automobile (VW).
Prévisions annuelles : 2027 : 40 000 pièces/an 2028 : 118 000 pièces/an 2029 : 142 000 pièces/an, puis augmentation jusqu'en 2034 avec 182 000 pièces/an 2035 avec 118 000 pièces/an

See attachment

REQUEST FOR QUOTATION S/No DESCRIPTION DESCRIPTION DIMENSIONS QTY Unit of measure 13 Single Laid Wire Rope Sling, Ø 14 mm, CSBL 12 mT, EWL 2.5m CSBL 12mT, EWL 2.5m h = 0.214m w = 0.107m s = 0.043m overlength = 0.364 same as loop 1 4 EA 14 Single Laid Wire Rope Sling, Ø 19 mm, CSBL 21 mT, EWL 2.5m CSBL 21 mT, EWL 2.5m h = 0.286m w = 0.143m s = 0.057m overlength = 0.485 same as loop 1 2 EA 15 Single Laid Wire Rope Sling, Ø 19 mm, CSBL 21 mT, EWL 7.5m CSBL 21 mT, EWL 7.5m h = 0.286m w = 0.143m s = 0.057m overlength = 0.485 same as loop 1 2 EA 16 Single Laid Wire Rope Sling, Ø 13 mm, CSBL 9 mT, EWL 4.5m CSBL 9 mT, EWL 4.5m h = 0.190m w = 0.095m s = 0.038m overlength = 0.323 same as loop 1 15 EA 17 Single Laid Wire Rope Sling, Ø 13 mm, CSBL 9 mT, EWL 2.3m CSBL 9 mT, EWL 2.3m h = 0.190m w = 0.095m s = 0.038m overlength = 0.323 same as loop 1 2 EA 18 Single Laid Wire Rope Sling, Ø 13 mm, CSBL 9 mT, EWL 1.0m CSBL 9 mT, EWL 1.0m h = 0.190m w = 0.095m s = 0.038m overlength = 0.323 same as loop 1 6 EA 19 Single Laid Wire Rope Sling, Ø 13 mm, CSBL 9 mT, EWL 12.0m CSBL 9 mT, EWL 12.0m h = 0.190m w = 0.095m s = 0.038m overlength = 0.323 same as loop 1 1 EA 20 Single Laid Wire Rope Sling, Ø 13 mm, CSBL 9 mT, EWL 5.0m CSBL 9 mT, EWL 5.0m h = 0.190m w = 0.095m s = 0.038m overlength = 0.323 same as loop 1 2 EA 21 Single Laid Wire Rope Sling, Ø 13 mm, CSBL 9 mT, EWL 10.0m CSBL 9 mT, EWL 10.0m h = 0.190m w = 0.095m s = 0.038m overlength = 0.323 same as loop 1 1 EA 35 Single Laid Wire Rope Sling, Ø 19 mm, CSBL 21 mT, EWL 10.0m CSBL 21 mT, EWL 10.0m h = 0.286m w = 0.143m s = 0.057m overlength = 0.485 same as loop 1 2 EA

Hello, We are seeking some bolts for immediate delivery. They MUST be manufactured by Bontempi Vibo. The spec for these bolts is Hexagon head full thread bolts M10 X 25 10.9 Mild Steel, Plain finish. Currently their MOQ is 40000 however we cannot accept this many on site. We require approximately 2000 bolts however can accept amounts in the low thousands. Thank you.

Kindly provide your commercial offer with lead time

DIN 975 10.9 12 x 1 000 mm (Gazotée à chaud) 180 pièces FRAIS DE LIVRAISON VERS LA GRÈCE INCLUS

RFQ 729668

BOLT 1/2 x 75 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 96 EA BOLT 1/2 x 65 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 344 EA BOLT 1/2 x 60 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 32 EA BOLT 5/8 x 75 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 232 EA BOLT 3/4 x 115 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 768 EA BOLT 5/8 x 90 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 64 EA BOLT 5/8 x 90 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B16 and ASTM A194 Gr 7 8 EA BOLT 1/2 x 70 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 128 EA BOLT 3/4 x 90 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 888 EA BOLT 1 x 140 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 32 EA BOLT 3/4 x 110 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B16 and ASTM A194 Gr 7 32 EA BOLT 1/2 x 65 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 528 EA BOLT 5/8 x 75 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 168 EA BOLT 1/2 x 65 ASTM A307 GR B, GALV heavy hex, w/ heavy hex nut, ASTM A563 GR A, GALV. 32 EA BOLT 7/8 x 115 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 1080 EA BOLT 1.375 x 230 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B16 and ASTM A194 Gr 7 224 EA BOLT 1.25 x 215 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 186 EA BOLT 1.25 x 215 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B16 and ASTM A194 Gr 7 56 EA BOLT 1 1/8 x 170 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 64 EA BOLT 7/8 x 120 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 64 EA BOLT 1 1/4 x 220 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 56 EA BOLT 1 1/4 x 220 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B16 and ASTM A194 Gr 7 552 EA BOLT 1 x 130 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 432 EA BOLT 1 3/8 x 230 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 112 EA BOLT 1 1/2 x 250 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 32 EA BOLT 1 1/8 x 130 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B16 and ASTM A194 Gr 7 112 EA BOLT 5/8 x 80 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 1624 EA BOLT 5/8 x 90 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 472 EA BOLT 5/8 x 110 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 224 EA BOLT 5/8 x 80 ASTM A307 GR B, GALV heavy hex, w/ heavy hex nut, ASTM A563 GR A, GALV. 64 EA BOLT 5/8 x 110 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B16 and ASTM A194 Gr 7 944 EA BOLT 5/8 x 90 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 144 EA BOLT 5/8 x 80 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 96 EA BOLT 5/8 x 110 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 224 EA BOLT 5/8 x 110 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B16 and ASTM A194 Gr 7 304 EA BOLT 1 1/4 x 170 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 216 EA BOLT 1.875 x 325 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 48 EA BOLT 1.875 x 325 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B16 and ASTM A194 Gr 7 216 EA BOLT 1 1/2 x 225 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 16 EA BOLT 2 1/2 x 450 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 120 EA BOLT 5/8 x 90 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and ASTM A194 Gr 2H 3792 EA BOLT 3/4 x 105 Stud bolts with two heavy hex. Nut, ASTM A193 Gr B7 and AS

Nous recherchons des vis M10x90 ISO 7380-2. Elles peuvent être à filetage partiel ou total. Nous avons besoin de vis ZP noires, mais toute autre vis fera également l'affaire. Première commande : 2 000 pièces, mais d’autres pourraient suivre.

Dears, We are pleased to invite you to quote your best prices , so please submit your best offer according to the specifications and conditions as described below : SL Description Units Qty. 1 ALLOY STEEL ASTM A193 GR. B7 BOLTS AND ASTM A194 GR 2H NUTS, STUD BOLTS, THREADED FULLL LENGTH WITH TWO HEX NUTS, LENGTH=145MM (1set=8nos) ,900# ,0 ,3"(Ø7/8") ,STUD BOLT ,STUD BOLT ,Q95B SET 12 2 WELDOLET,CARBON STEEL ASTM A105N, FUSION BONDED EPOXY LINED WELDOLET, TO MSS SP-97, WT TO MATCH PIPE ,STD ,12"X2" ,WELDOLET CS ,FITTINGS ,Q15B NOS 6 3 150#, INSULATION KIT (TYPE E), GASKET, INSULATING SLEEVE & WASHER, GLASS REINFORCED EPOXY LAMINATED ,150# ,12" ,INSULATION KIT,TYPE-E, GRE(G-10) ,INSULATION KIT ,Q15B NOS 2 4 WELDOLET,CARBON STEEL, FUSION BONDED EPOXY LINED,BEVELED ENDS, SEAMLESS, ,STD WT ,STD ,10"X2" ,WELDOLET CS ,FITTINGS ,Q35B NOS 12 5 Y-STRAINER,REFER DATA SHEET ,300# ,10" ,STARINER CS ,STRAINER ,Q35B NOS 3 6 CARBON STEEL ASTM A105N, FUSION BONDED EPOXY LINED WELDING NECK, RAISED FACE, 300LB, TO ASME B16.5, SCH.STD ,300# ,STD ,2" ,FLANGE WNRF CS ,FLANGE ,Q35B NOS 18 7 CARBON STEEL, A105N, FUSION BONDED EPOXY LINED WELDOLET, TO MSS SP-97, WT TO MATCH PIPE ,STD ,8"X2" ,WELDOLET CS ,FITTINGS ,Q35B NOS 6 8 CARBON STEEL, A105N, FUSION BONDED EPOXY LINED WELDOLET, TO MSS SP-97, WT TO MATCH PIPE ,STD ,4"X2" ,WELDOLET CS ,FITTINGS ,Q35B NOS 6 9 CV, 300#, (REFER DATA SHEET) ,300# ,4" ,CONTROL VALVE ,VALVE ,Q35B NOS 2 10 FCV, 300#, (REFER DATA SHEET) ,300# ,12" ,FLOW CONTROL VALVE ,VALVE ,Q35B NO 1 11 CARBON STEEL ASTM A105N, FUSION BONDED EPOXY LINED WELDING NECK, RAISED FACE, 900LB, TO ASME B16.5, SCH.160 ,1500 ,160 ,2" ,FLANGE WNRF CS ,FLANGE ,Q95B NOS 5 12 CARBON STEEL ASTM A105N, FUSION BONDED EPOXY LINED BLIND FLANGE, RAISED FACE, 900LB, TO ASME B16.5 ,900# ,3" ,BLIND CS ,FLANGE ,Q95B NOS 2 13 WELDOLET,CARBON STEEL, A105 FUSION BONDED EPOXY LINED,BUTTWELD ENDS, SEAMLESS, 160, TO MSS-SP-47. ,160 ,8"X2" ,WELDOLET CS ,FITTINGS ,Q95B NOS 6 14 PIKOTEK VCS OR EQUIVALENT, SUPER DUPLEX CORE 1500 LB, SUPER DUPLEX SS CORE, G-10 LAMINATE, W/SPRING ENERGIZED RADIAL FACE TEFLON SEAL, ASME B16.5 ,1500# ,3/4" ,GASKET PIKOTEK ,GASKET ,Q95B NOS 26 15 PIKOTEK VCS OR EQUIVALENT, SUPER DUPLEX CORE 1500 LB, SUPER DUPLEX SS CORE, G-10 LAMINATE, W/SPRING ENERGIZED RADIAL FACE TEFLON SEAL, ASME B16.5 ,1500# ,2" ,GASKET PIKOTEK ,GASKET ,Q95B NOS 14 16 PIKOTEK VCS OR EQUIVALENT, SUPER DUPLEX CORE 900 LB, SUPER DUPLEX SS CORE, G-10 LAMINATE, W/SPRING ENERGIZED RADIAL FACE TEFLON SEAL, ASME B16.5 ,900# ,3" ,GASKET PIKOTEK ,GASKET ,Q95B NOS 2 17 PIKOTEK VCS OR EQUIVALENT, SUPER DUPLEX CORE 900 LB, SUPER DUPLEX SS CORE, G-10 LAMINATE, W/SPRING ENERGIZED RADIAL FACE TEFLON SEAL, ASME B16.5 ,900# ,8" ,GASKET PIKOTEK ,GASKET ,Q95B NOS 6 18 1500# "E" TYPE,INSULATION KIT (TYPE-E) INSULATION KIT GASKETS, INSULATING SLEEVE & WASHERS - GLASS REINFORCED EPOXY LAMINATED ,1500# ,2" ,INSULATION KIT,TYPE-E, GRE(G-10) ,INSULATION KIT ,Q95B NOS 5 19 CARBON STEEL API-5L GRADE B PSL2, FUSION BONDED EPOXY LINED BEVELED ENDS, SEAMLESS, TO ASME B36.10, SCH 120 ,120 ,6" ,PIPE SMLSS CS ,PIPE ,Q95B MTRS 6 20 WELDOLET,CARBON STEEL ASTM A105 FUSION BONDED EPOXY LINED BEVELED ENDS, SEAMLESS, WT TO MATCH PIPE MSS-SP-97 ,160 ,6"x3" ,WELDOLET CS ,FITTINGS ,Q95B NOS 6 21 WELDOLET,CARBON STEEL ASTM A105 FUSION BONDED EPOXY LINED BEVELED ENDS, SEAMLESS, WT TO MATCH PIPE MSS-SP-47. ,160 ,12"X3" ,WELDOLET CS ,FITTINGS ,Q95B NOS 3 22 WELDOLET,CARBON STEEL ASTM- FUSION BONDED EPOXY LINED BEVELED ENDS, SEAMLESS, WT TO MATCH PIPE MSS-SP-47. ,160 ,12"X2" ,WELDOLET CS ,FITTINGS ,Q95B NOS 3 23 REDUCING TEE,CARBON STEEL ASTM FUSION BONDED EPOXY LINED BEVELED ENDS, SEAMLESS, WT TO MATCH PIPE ,120 ,12"X6" ,RED.TEE CS ,FITTINGS ,Q95B NOS 3 24 PIKOTEK VCS OR EQUIVALENT, SUPER DUPLEX CORE 900 LB, SUPER DUPLEX SS CORE, G-10 LAMINATE, W/SPRING ENERGIZED RADIAL FACE TEFLON SEAL, ASME B16.5 ,9

C             COMPONENTS AND REPLACEABLE PARTS               Unit                     Qty

1             Clip - Wire Rope, size 5/16", 3/8" UNC     EA                        1000

2             Corrosion-316L (SS) Chain, 5/8", 6900lb  M                         500

3             Corrosion-316L (SS) Chain, 3/4",10600lb M                         500

4             Corrosion-316L(SS) Chain, 3/8", 2650lb S               M                         500

5             Masking Tape,   2" wide, 60 yard Roll        ROL                      1000

6             O - Ring  R24      EA                        1000

7             Ring, Lifting, size 1", 15200 lbs.   EA                        1000

8             Ring, Lifting, size 1 1/4'', 35160 lbs.          EA                        1000

12           Rope, Nylon  Rope, 1 1/4" (32mm) OD    M                         3000

13           Rope, Nylon Rope, 6mm OD        M                         2000

14           Rope, Wire Rope, 1/4" OD            M                         1000

15           Shackle, Anchor Screw Pin, 1/2'', 2 Tons  EA                        500

16           Screw Pin, Anchor Shackle            EA                        500

17           Shackle, Anchor, Bolt & Nuts, size 3/4''    EA                        500

18           Shackle, Chain  3/4"        EA                        500

19           Thimble - Galv-steel wire rope, size 1''     EA                        500

20           Thimble - Galv-steel wire rope, size 5/8   EA                        500

21           Strand Water Flex Manila Rope, 1 1/8"    M                         500

22           Corrosion-Resistant Type 316L (SS) Chain               EA                        500

23           Shackle, 3/8"      EA                        500

24           Manila Fibre Rope 1 1/4"              M                         500

25           Corrosion-Resistant Type 316L (SS) Chain               EA                        500

• Goujon fileté 1-5/8" x 410 mm, ASME B18.31.2 (42CrMo4), galvanisé à chaud – 48 pièces
 

Hi, Please provide the below part price at the earliest. End Customer:

GE Aerospace

GE Part Number :9025M79P09 CAGE CODE:53551

VENDOR PART NUMBER: AF5141R3-9 T

POLYPRO BOLT WITH NUT AND WASHER SIZE: 3/4" X 4.5" (SET OF 8 NOS) - 4set • POLYPRO BOLT WITH NUT AND WASHER SIZE: 5/8" X 4" (SET OF 8 NOS) – 6 set

Kindly provide best commercial offer including delivery time make sure its stock, payment terms, and any available technical datasheet or drawing to ensure compatibility.

DIN 6914 10.9

HDG

M30x115. whole kit (bolt,nut and washers)

20.000pcs. annual demand

For one import at least 3.000pcs.

3.1 attest also required

Looking for a supplier of:

N.910.742.01 Part nr.: Consumption / Year N.910.742.01 26,000 pcs.

SOP 2026 / August / EOP 

Hexagonal head grade 10.9 plain DIN 933 M16x350

QUANTITY 30

Thank you for reply please with cost of transport
 

No. 1 – 20-Piece Set – Stud Bolt – Size: 5/8, Thread: 11UNC, Length: 110mm, Material: ASTM A193-B7, including 2 ASTM A194-2H Nuts + 2 Washers, Coating: Zinc Flake / Zn-Ni + Xylan 1424, Manufacturer: BECK CRESPEL Item

No. 2 – 5-Piece Blind Flange – 2, Class 150#, Raised Face, Smooth Finish (Ra 3.2–6.3 µm), ASTM A105N, ASME B16. 5, as per GS EP PVV 145, supplied with 3.1B material certificate. Item

No. 3 – 20-Piece Set – M12x70 Stud Bolt – ASTM A193 Gr B7, with 2 ASTM A194 Gr 2H Nuts, Coating: Zinc Flake / Zn-Ni + Xylan 1424, 3.1B Certificate, Manufacturer: BECK CRESPEL Item

No. 4 – 30-Piece Set – Klingerite Gasket – JD TC Blue, Pressure: 40 bar, Temp: 250°C, Thickness: 2 mm, Size: 14 (356 x 486 mm), Ref: F27: 740R, Manufacturer: JAMES WALKER Item

No. 5 – 20-Piece Set – Stud Bolt – 5/8x210 mm + 2 Nuts + 2 Washers, ASTM A193-B7, Certificate Required Item

No. 6 – 30 Set – Stud Bolt – Size: 5/8, Thread: UNC, Length: 90mm, ASTM A193-B7, incl. 2 Nuts ASTM A194-2H, Coating: Zinc Flake / Zn-Ni + Xylan 1424, Manufacturer: BECK CRESPEL (Ref: 5/8 UNCX90MM A193-B7) Item

No. 7 – 20 Pc – Stud bolt M12x105 – ASTM A193 Gr B7, with 2 Nuts ASTM A194 Gr 2H, Coating: Zinc Flake / Zn-Ni + Xylan 1424, Supplied with Certificate 3.1B Item

No. 8 – 20 Set – Stud bolt 1/2x90mm – ASTM A193 Gr B7, with 2 Heavy Hex Nuts ASTM A194 Gr 2H, Coating: Zinc Flake / Zn-Ni + Xylan, Certificate 3.1B Item

No. 9 – 50 Set – Stud bolt + 2 Nuts – 5/8x105mm, Full thread, ASTM A193-B7M + ASTM A194-2HM, Coating: Zinc Flake / Zn-Ni + Xylan 1424, Supplied with Certificate 3.1B, TAG: DAL/FPSOH/HSG/WW/STUD BOLT Item

No. 10 – 20 Pc – Stud bolt – 5/8x170 mm + 2 Nuts + 2 Washers, ASTM A193-B7, Coating: Zn Flake / Zn-Ni + Xylan 1424, Certificate required Item

No. 11 – 20 Set – Stud bolt 1/2x105mm – ASTM A193 Gr B7, with 2 Heavy Hex Nuts ASTM A194 Gr 2H, Zinc/Bichromate treated, as per GS EP PVV 146, Suppliers with Certificate 3.1B Item

No. 12 – 100 Set – Stud bolt – Size: 11/8, Thread: 8UN, Length: 230mm, ASTM A193-B7, incl. 2 Nuts ASTM A194-2H, Certificate required

Taper pins with external thread DIN EN 2873

Screw for termplastic vary low head philips 5x1.7, photo attached, dimension measured on samples 1) 5.3 mm 2) 0.55 mm 3) 3,4 mm 4) 1.67 mmm
qty 9,000 psc , black zinc-plated



 

Dear Team, Good day, I hope this email finds you well. Hunting Energy, kindly invites you to bid on supplying the below list of materials. CABLE TIE, 200MM, 100 PER PACK SAPISELCO SEL.2.223 QUANTITY: 11 PACK CABLE TIE, 360MM, 100 PER PACK SAPISELCO SEL.3.426 QUANTITY: 12 PACKS 

BOLT: STUD THRD W/2HVY HEX NUT BOLT STUD THRD W/2HVY HEX NUT BOLT: STUD THRD W/2HVY HEX NUT BOLT: STUD W/2 HVY HEX NUTS BOLT:HEX HEAD TYPE:STUD BOLT:HEX HEAD TYPE:STUD BOLT:HEX HEAD TYPE:STUD BOLT:HEX HEAD TYPE:STUD BOLT TYPE:STUD DIA:3/4 IN BOLT TYPE:STUD DIA:1-5/8 IN BOLT TYPE:STUD DIA:1-3/8 IN

Kindly provide me the Quotation, Urgently needed

Furniture producer is currently in search of rivets – blind rivet nuts.

Below are our requirements:

• Diameter: From M3 to M8

• MUST BE A SOLUTION THAT LEAVES THE INSTALLATION SURFACE FLUSH. IT SHOULD NOT PROTRUDE AT ALL – THIS IS VERY IMPORTANT.

• Durable and corrosion-resistant: The material must be suitable to withstand torque and other tensions, as well as resistant to rust and corrosion. Specifically for the latter point, we would like you to send us any specifications you may have. As you understand, we are referring to physical properties, so we require numerical data.

Rivets that have already worked for us are the following item codes from CLUFIX: • 01A030AHO023Z • 01A050AHO025Z • 01A060AHO035Z

So, your solution must achieve similar results. At this stage, it is essential that we receive some samples from you.

These will then be tested by our production team so we can draw reliable conclusions about their usability and specifications.

We intend to place a large order at a later stage, so it is vital for us to evaluate the product firsthand.

We look forward to your response and any clarifying questions you may have.

2025 years total demand are: Corner hinges --> 127,000 pcs Connection hinges --> 3,200 pcs 2026 years total demand are: Corner hinges --> 8.8 mln. pcs Connection hinges --> 300,000 pcs

Searching for supplier who can offer wide variety of painted rivets.

This is an inquiry for 20,000 pieces of each (top and bottom part), according to the drawing and picture attached.
No need to quote the screws.
Only quote the top part and the bottom part.
Top part has a smooth hole Ø3,1 mm
Bottom part has a threaded hole M3
Material is Zinc Plated Steel
Kindly include leadtime and delivery cost to FRANCE (Incoterm DAP).
Thank you,
Best regards.



 

Annual Volume - 35,000 lengths, best prices only.

Close tolerance bolts SLB163-103 01 Aircraft; UH-60 

PLEASE PROVIDE YOUR BEST OFFER FOR THE ITEM. KINDLY ADVISE LEAD TIME, CONDITION AND CERTIFICATE TYPE. THANK YOU

GOOD MORNING,

PLEASE SEND ME YOUR BEST OFFER AND THE SHORTEST DELIVERY TIME FOR:

264 pcs Screw M24 x 200 Gr. 5.6 Zn EN ISO 4014 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C
172 pcs Screw M20 x 130 Gr. 5.6 Zn EN ISO 4014 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C
48 pcs Screw M20 x 140 Gr. 5.6 Zn EN ISO 4014 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C
120 pcs Screw M33 x 340 Gr. 5.6 Zn EN ISO 4014 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C
60 pcs Screw M24 x 160 Gr. 5.6 Zn EN ISO 4014 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C
128 pcs Screw M27 x 240 Gr. 5.6 Zn EN ISO 4014 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C
128 pcs Nut M27 Gr. 5 Zn EN ISO 4032 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C
120 pcs Nut M33 Gr. 5 Zn EN ISO 4032 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C
324 pcs Nut M24 Gr. 5 Zn EN ISO 4032 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C
220 pcs Nut M20 Gr. 5 Zn EN ISO 4032 3.1+PED 2014/68/EU, Annex 1, no 4.3, Kv -29°C

Ref/ PN Descrição Qty 51010.200.080 BOLT, HEX HEAD M20 X 80MM C/W NUTS SST - COARSE-THREAD (300) 51173.200.001 M20 X 80MM NUTS SST - COARSE-THREAD (300) 22060.270.150 M27 X 150MM C/W NUTS - A193-B7 / A194-2H XYLAR/XYLAN COATED (300)

BOLT, HEX-HD, size M16, lg-u/hd 90 MM, lg-thrd FULL, matl CS-CL 4.6, coat GALV, +NUT Specification : Additional data +NUT Coating GALV Coating GALV Length, thread FULL Length, under head 90 MM Matl CS-CL 4.6 Matl spec, nut ISO 898-2 CL 4 Matl Spec, Bolt ISO 898-1 CL 4.6 Size M16

It is very urgent, delivery 1-2 weeks from European suppliers/producers

can be PZ or PH, but must be plain steel

Please provide quotation for:

Knockout Punch Set

Ø PG7 to PG63 • Quantity: 05 units Quotation requirements: • Unit and total price • Delivery times • Technical datasheets and conformity certificates • COO + packaging details  Prometim Manutenção We look forward to your best proposal. Best regards,

I need 100 samples ASAP

Hexagonal screw M 12 x 100 ISO 4014 C3-80 180 PCS

Hexagonal screw M 10 x 45 ISO 4014 C3-80 504 PCS

Hexagonal screw M 12 x 70 ISO 4014 C3-80 72 PCS

Hexagonal nut M 12 ISO 4032 C3-80 180 PCS

Hexagonal nut M 10 ISO 4032 C3-80 504 PCS

Washer 13 DIN 125 1.4571 180 PCS

HV SET DIN EN 14399-4 1 BOLT + 1 NUT

M27 X 145

Zinc-plated steel 10.9

7500 pcs.

REQUEST FOR QUOTATION; SAR-728739; CLOSING DATE: 30-08-2025

Please send quotation based on ex stock or lead time of 2-3 weeks

DIN 934, steel, property 8 , in zink plated, M6-70000 pcs, M8-150000 pcs, M10-100000 pcs, M12-120000 pcs, M14 -7000 pcs, M16-60000 pcs, M20- 35000 pcs ,M24 - 20000 pcs , M30- 5000 pcs

DIN 6923 , steel, property 8 , in zink plated, M3-70000 pcs, M4-60000pcs, M5 -30000 pcs, M6-400000 pcs, M8- 600000 pcs, M10-300000 pcs, M12-40000 pcs, M16-20000 pcs

NOT China origin becouse of untidamping

Looking for DIN6921 Fasteners .Prefferable coating: ZnFl or ZnNi. Need to understand the actual availability ASAP, The lead time can be discussed (0-20Weeks)

1) BOLT, IRON, UNC, KENCO,453215 100.00 EA Bolts, Hexagon head, Metric Material MALLEABLE IRON Mat spec, bolting ASTM A197 Coating TEFLON (PTFE) Type of thread UNC Number, nuts per bolt 2 Length, under head 35 mm Size M10 2) BOLT,IRON,UNC,KENCO,451234 200.00 EA Bolts, Hexagon head, Metric Material MALLEABLE IRON Mat spec, bolting ASTM A197 Coating TEFLON (PTFE) Type of thread UNC Number, nuts per bolt 2 Length, under head 50 mm Size M12

URGENT INQUIRY TO SUPPLY Seamless carbon steel tube for heat exchanger according to ASME SA-179 and ASME SA -450 /SA -450M (QTY / piece) 1- All tube shall be cold drawn this must be clearly specified in material and test certificate 2- all requirement of ASME SA-179 Last edition as well as ASME SA -450 /SA -450M 3- each tube shall to tested either hydrostatically OR EDDY CURRENT TESTED according to ASME SA-179 and ASME SA -450 /SA -450M 4- SHALL be submitted material certificate and mill test certificate 5-tube shall be square cut , cut ends of tubes shall be deburred 5- tubes PRODUCED only EUROP -USA- JAPAN

We are looking for a pan head concrete screw manufacturer zinc silver/clear finish all sizes from 7.5 x 40mm (or 42mm) up to 7.5 x 200mm (or 202mm)

1.VALVE DBB -1" x 3/4" DBB VALVE CL2500 RF X FNPT SUPER DUPLEX SS ASTM A182-F53 BODY SUPER DUPLEX SS BALL & STEM PEEK SEATS RP BALL/NEEDLE/BALL 1/2" NPT VENT FLOATING INTEGRAL FLANGE x 3/4" FNPT LEVER HFVYZ1.Vendor drawing required to confirm valve details & dimensions. QTY:2.00 2.STUD BOLT:ALL-THREAD TYPE:STUDBOLT DIA:2IN LG:360MM SPEC:A193 GR:B7 MATL:CS COATED:PTFE THRDS:UNC C/W:HEX NUT STUD BOLT -2" STUDBOLT 360MM LONG ASTM A193-B7 W/2 HH NUTS ASTM A194-2H PTFE COATED PER PIM-SU-5300 TABLE 2 QTY:12.00 3.STUD BOLT:ALL-THREAD TYPE:STUDBOLT DIA:1- 1/2 LG:290MM SPEC:A193 GR:B7 MATL:CS COATED:PTFE THRDS:UNC C/W:HEX NUT STUD BOLT - 1 1/2" STUDBOLT 290MM LONG ASTM A193-B7 W/2 HH NUTS ASTM A194-2H PTFE COATED PER PIM-SU-5300 TABLE 2 QTY:96.00 4.STUD BOLT:ALL-THREAD TYPE:STUDBOLT DIA:1- 1/4 LG:300MM SPEC:A193 GR:B7 MATL:CS COATED:PTFE THRDS:UNC C/W:HEX NUT STUD BOLT -1 1/4" STUDBOLT 300MM LONG ASTM A193-B7 W/2 HH NUTS ASTM A194-2H PTFE COATED PER PIM-SU-5300 TABLE 2 QTY:8.00 5.FLANGE:BLIND TYPE:COMPACTBLIND SIZE:10IN FACE:RTJ RATING:2500LB MATL:SUPER DUPLEX SPEC:ASTM A182-F53 ASME SECT. VIII GRADE:F53 COMPACT FLANGE BLIND - COMPACT BLIND FLANGE CL2500 CF RTJ SUPER DUPLEX ASTM A182-F53 ASME SECT. VIII DIV. 1 APPENDIX 2 AND MFR STD. NOTE - Correct material description - NCF5/BL/IX/DN250/CL2500/A182F53 - NORSOKL-005-STANDARD Blind Flanged RTJ ends much match the previously supplied Norwegian standard flanges already supplied QTY:3.00 6. STUD BOLT:ALL-THREAD TYPE:STUDBOLT DIA:1IN LG:180MM SPEC:A193 GR:B7 MATL:CS COATED:PTFE THRDS:UNC C/W:HEX NUT STUD BOLT -1" STUDBOLT 180MM LONG ASTM A193-B7 W/2 HH NUTS ASTM A194-2H PTFE COATED PER PIM-SU-5300 TABLE 2 QTY:152.00 7.STUD BOLT:ALL-THREAD TYPE:STUDBOLT DIA:7/8IN LG:150MM SPEC:A193 GR:B7 MATL:CS COATED:PTFE THRDS:UNC C/W:HEX NUT STUD BOLT -7/8" STUDBOLT 150MM LONG ASTM A193-B7 W/2 HH NUTS ASTM A194- 2H PTFE COATED PER PIM-SU-5300 TABLE 2 QTY:24.00

We require a quote for an M10 weld nut according to MBN 10369 Form B. Annual requirement: 100,000 pieces. Thank you.

DIN 976

M42 L=710  

A4-80

44 pcs.

DIN 934

44 pcs.

DIN 7985 machine screws Ph slot

4.8 + zinc plated, cross recessed

M5x65

min 500pcs

ASAP

LN 1481 030 014 SPRING PIN 1300 LN 29 786 - 06X48 BOLT 100 LN 29 792 K 05 X 04 HEXAGONAL BOLT 3300 LN 29 792 K 08 X 06 BOLT 4600 LN 29522 05026 BOLT 500 LN 29522 S 05 036 BOLT 240 LN 29540 A03 THREAD INSERT 9600 LN 29540 A03 INSERT 540 LN 29540 A04 THREAD INSERT 10 LN 29540 B 07 INSERT 750 LN 29540 B03 INSERT 1480 LN 29540 B04 THREADED INSERT 704 LN 29540 B06 THREADED INERT 50 LN 29540 B09 THREADED INSERT 200 LN 29540 B09 THREADED INSERT 100 LN 29540 B10 THREADED INSERT 20 LN 29540-A04 THREADED INSERT 800 LN 29761 A05M NUT 100 LN 29786-M6 X 22 BOLT 100 LN 29790 M06 NUT 40 LN 29790 M5 NUT 75 LN 29790 M6 NUT 40 LN 29790-M05 NUT 50 LN 29792 05 18 BOLT 20 LN 29792 05 20 BOLT 20 LN 29792 05X22 BOLT 4700 LN 29792 06 018 HEX HEAD SCREW 100 LN 29792 K 05 X 08 BOLT 1600 LN 29792 K 06 06 BOLT 8400 LN 29792 K 06X10 BOLT 4104 LN 29792 K05 04 BOLT 80 LN 29792 K06 06 BOLT 360 LN 29792 K06 08 BOLT 200 LN 29792 K06 X 08 HEX. BOLT 4600 LN 29919 05 NUT 1000 LN 29919 06 NUT 2000 LN 29919 08 NUT 1000 LN 29919 10 NUT 500 LN 29940 05 036 CSK SCREW 60 LN 29943 K 06004B BOLT 3250 LN 29943 K 08 38 HEXAGONAL BOLT 100 LN 29943 K05 012B BOLT 75 LN 29943 K06 004B BOLT 80 LN 29943 S06 013B BOLT 6 DIA 103 LN 29951 05 ANCHOR NUT 1030 LN 29952 04 05K WASHER 300 LN 29954 05 ANCHOR NUT 290 LN 29954-05 ANCHOR NUT 13100 LN 29986 05 ANCHOR NUT 100 LN 29986 AM5 ANCHOR NUT 154 LN 29990 AM6 A/NUT. 500 LN 29991 05 ANCHOR NUT 100 LN 65007 B0 4M NUT 1200 LN 65138-08 NUT 600 LN 65409 - 08 NUT 11000 LN 65409 010 NUT 5650 LN 65409 08 NUT 500 LN 65409 10 NUT 100 LN 9025 04 10L WASHER. 500 LN 9025 04 15L WASHER 750 LN 9025 18 15K WASHER 50 LN 9038 06 040 BOLT 150 LN 9038 06 042 BOLT 250 LN 9038 08 016 BOLT 200 LN 9038 K04 006 SCREW 150 LN 9038 K04 020 BOLT 200 LN 9139 M3 15 SCREW 50 LN 9139 M4 06 SCREW 50 LN 9166 4.3 WASHER 650 LN 9166 5.3 WASHER 600 LN 9179 24 16E RIVET 300 LN 9198 40 20B RIVET 100 LN 9199-S-2406E RIVET 500 LN 9338 03 NUT 1600 LN 9338 04 NUT 2300 LN 9338 05 NUT 3100 LN 9338 05K HEXAGON WASHER NUTS 1000 LN 9338 06 NUT 3052 LN 9338 08 NUT 1610 LN 9338 10 NUT 805 LN 9338 M5 NUT 50 LN 9380 - 06X70 BOLT 600 LN 9380 M6X70 BOLT. 100 LN 9439 AM5 028 PAN HERAD SCREW 300 LN 9439 AM6 18 SCREW 100 LN 9439 M3 16 SCREW 25 LN 9449 A04 180 THREAD INSERT 500 LN 9469 - 06 040 BOLT 100 LN 9469 06 040 BOLT 20 LN 9499 A 04 180 HELICOIL INSERT 100 LN 9499 A 06 120 HELICAL INSERTS 500 LN 9499 A 06 160 HELICOIL INSERT 1300 LN 9499 A 09 150 HELICOIL INSERT 4050 LN 9499 A02 080 THREAD INSERT 100 LN 9499 A03075 HELICOIL INSERT 7200 LN 9499A-020-40 HELICOIL THREAD INSERT 2100 LN.1481.030.006.A SPRING PIN 100 LN.1481.030.020.A SPRING PIN 50 LN.29540.A08 THREADED INSERT 2300 LN.29540.B03 THREAD INSERT 113900 LN.29540.B04 THREAEDED INSERT. 17150 LN.29540.B06 THREAD INSERT 2350 LN.29540.B07 THREADED INSERT. 22500 LN.29540.B10 THREADED INSERT 2700 LN.29790.M4 NUT 100 LN.29790.M5 NUT 2300 LN.29790.M6 HEX. NUT 100 LN.29919.05 NUT 2250 LN.29919.06 NUT. 38950 LN.29919.08 NUT 15250 LN.29919.10 NUT 800 LN.29951.05 DOME ANCHOR NUT 21710 LN.29951.06 ANCHOR NUT. 100 LN.29985.A05 A/NUT 100 LN.29986.05 ANCHOR NUT. 5200 LN.65408.M8 NUT 1300 LN.65409.10 NUT 200 LN9025-0510L WASHER. 500 LN.9166.3.2 WASHER 1000 LN.9262.3.1 CABLE SHOE (SUPPLIED WITH 550 LN.9338.03 NUT. 41100 LN.9338.04 NUT 17250 LN.9338.04M HEXAGONAL NUT 50 LN.9338.05 HEX. NUT 122800 LN.9338.06 SELF LOCKING NUT 40000 LN.9338.08 NUT. 12700 LN.9338.10. HEX. NUT. 9250 LN.9380.M8X75 BOLT 650 LN.9499.A03.050 INSERT 550 LN.9499.A03125 INSERT (HELICOIL) 100 LN.9499.A04090 THREAD INSERT 2750 LN.9499.A07120 INSERT (HELICOIL) 100 LN29786-08 X 42 BOLT 100 LN29786-08X21 BOLT 100 LN29943-K05012B CSK HEAD SCREW 150 LN9166.4.3 WASHER. 7000 LN9166.5.3 WASHER. 13068 LN9166.6.5 WASHER. 4000 LN933807 HEX.WASHER NUT 1000 LN9338-14 NUT 1100 LN9469-06-40 CSK SCREW 1650

DIN 933 M24x75 / ISO 4017 / mat. 1.4980 / 390 pcs
DIN 934 M24 / ISO 4032 / mat. 1.4980 / 390 pcs
DIN 125fi25 / ISO 7089 / mat. 1.4980 / 390 pcs

STUD BOLT, ST.ST 316 ASTM A276, WITH TWO HEAVY HEX. NUTS & WASHER, SIZE: 7/8" x 145 mm Your offer must include:- • Validity: Your Quotation should be valid for 90 days at least. • The name and address of the Manufacturer and Country of Origin to be stated. • Please provide us your offer on your Letter head • kindly provide us the data sheet and catalogues • Country of Origin Certificate to be provided (European Origin) • Certificate (Mechanical and Chemical Analysis Test Certificate) to be provided • Delivery Period: Please quote your best possible shipment period in your offer. • Shipment to Egypt / Alexandria • Payment terms.

Hex nuts ISO 4032

M52 class 10

black

Qty is 2400 pcs

If price and delivery suits, then qty can be bigger

Please send me your best offer and the shortest delivery time for:

SCREW DIN 7500E M5X10 ZP-100.000 PCS
 

ISO4032 M52 10 St - 1000 pcs 3.1 certificate is required Please quote me your availability, price and delivery time.

Please quote shipment too

Please share quote at earliest. Also please confirm brand and country of origin where possible.

CODE DESCRIPTION ALTERNATIV PCS 4011572 SCREW M4x8 DIN 912 INOX-A4 100 4009509 M4x18 DIN 912 INOX-A4 500 4009721 M6x12 DIN 933 INOX A5 – priority DIN 933, 912, 7985 A5 500 4009711 M6x16 DIN 933 INOX A5 M6x15 or 16 or 18 (ideal is M6x16) – DIN 933, (possible also in DIN 912; A5) 500 4011170 M6x20 DIN 933 INOX A5 M6X18, DIN 933, 912, 7985, altern. A4 100 4011183 Washer 6 SPEC 19 HRN M.B2.142 Support-18x6 Stainless Steel A5 DIN 93 A5 or altern.i A4 100 4009720 Self-locking Nut M8 DIN 985 Stainless Steel A5 or standard (non-self-locking) version, also in A5" 500 4011540 O-Ring 13x1.5 DIN 3770 MVQ 70Sh Also in another grades possible. 100

ALL LINES + CERT 3.1

Please send best price & Delivery time

Fastening Bolts with Nuts

Bolts 60mm x 20mm, Hardness 8.8 o 60 mm length ≈ 2.36 inches o 20 mm diameter ≈ 0.79 inches o ⟶ Equivalent: 3” x 3/4” bolts (approximate) o Qty: 600 bolts + 1200 nuts (3/4”) [b]2[/b]. Bolts 60mm x 16mm, Hardness 8.8 o 60 mm length ≈ 2.36 inches o 16 mm diameter ≈ 0.63 inches o ⟶ Equivalent: 2-1/2” x 5/8” bolts (approximate) o Qty: 1000 bolts + 2000 nuts (5/8”)

Mounting Screws[/b] [b]3[/b]. 24mm x 20mm, Hardness 8.8 o Length: 24 mm ≈ 0.94 inch o Diameter: 20 mm ≈ 0.79 inch (3/4”) o ⟶ Equivalent: 1” x 3/4” screws o Qty: 100 pcs [b]4. [/b]20mm x 160mm, Hardness 8.8 o Length: 160 mm ≈ 6.30 inches o Diameter: 20 mm ≈ 0.79 inch (3/4”) o ⟶ Equivalent: 6-1/4” x 3/4” screws o Qty: 200 pcs [b]5.[/b] 16mm x 45mm, Hardness 8.8 o Length: 45 mm ≈ 1.77 inches o Diameter: 16 mm ≈ 0.63 inch (5/8”) o ⟶ Equivalent: 1-3/4” x 5/8” screws o Qty: 200 pcs 6. 16mm x 80mm, Hardness 8.8 o Length: 80 mm ≈ 3.15 inches o Diameter: 16 mm ≈ 0.63 inch (5/8”) o ⟶ Equivalent: 3-1/8” x 5/8” screws o Qty: 300 pcs

Please include: • Delivery Time. • Country of Origin. • Validity 90 days. • Package's weight and dimensions. • Shipping Charges. 

Please send quotation for the manufacture and supply of the following components as per attached drawings and specified materials: 📄 Component List: Item No. Description Steel Grade Weight (kg) 1 Worm Bushing AISI 304H / 0Cr19Ni9 28.5 2 Worm Bushing AISI 304H / 0Cr19Ni9 37 3 Worm Bushing AISI 304H / 0Cr19Ni9 45 4 Worm Bushing AISI 304H / 0Cr19Ni9 33.5 5 Worm Bushing AISI 304H / 0Cr19Ni9 27 6 Worm Bushing AISI 304H / 0Cr19Ni9 33.5 7 Worm Bushing AISI 304H / 0Cr19Ni9 42 8 Worm Bushing AISI 304H / 0Cr19Ni9 47 9 Worm Bushing AISI 304H / 0Cr19Ni9 46.5 10 Worm Bushing AISI 304H / 0Cr19Ni9 41 11 Worm Bushing J92971 (USA) 39 12 Worm Bushing J92971 (USA) 37 13 Shaft AISI 304H / 0Cr19Ni9 1880 14 Sleeve I J92971 (USA) 65.2 15 Sleeve V J92971 (USA) 49 Please include in your quotation: Price per unit (EXW/FOB terms) Manufacturing lead time Material certificates (EN 10204 3.1/3.2 if available) Tolerance and machining standards Surface finish specifications Packing details and dimensions Photos of similar previous work (if available) Any minimum order quantity requirements Please find the attached drawings for your reference

Pease send a quote for the following material: *M20 threaded rods, class 10.9, preferably hot-dip galvanized or alternatively electrogalvanized, total 1014 m, in 3 m long bars (other lengths are available). Partial deliveries can be considered. Delivery by August 8. 

Please send quote for the item below:

79 pcs - 1-8 X 180MM ASTM A320 B8M ATS ETE W/2 A194 GR8M Heavy hex nuts XYLAN 1424 BLUE CTD

Urgent inquiry

Please quote for the below inquiry. NO, Items Description Unit Qty Make: SB2N 14. 1000063298 SB2N,B7,2H,8UN,1.7/8in,375mm EA 16 16 1000063076 SB2N,A193-B7,UNC,140mm,3/4in EA 288

richiesta offerta

Please provide either the part numbers above or an equivalent

EN 3.1 certificate required

We are looking to source screws compatible with standard flush-mounted electrical wall boxes, typically used for securing wall outlets and light switches in residential buildings. These screws often have a fine thread and specific lengths designed to fit into the built-in metal or plastic brackets inside the boxes. Please indicate available dimensions, head types, and compatibility with typical European wall boxes. Used for FLEXI+ WALL BOX and others 32mm long -  Zinc plated. 5000 pcs each.

We are requesting your offer for the following items. All parts must meet the following specifications:

Hot-Dip Galvanized (HDG) by the manufacturer

Not oversized threads or dimensions

Thread tolerances must comply with the original standard (no oversized tapping)

Bolts must have chamfered ends for smooth nut engagement

Inspection and manufacturing certificates must be included for all items

Requested Items:
Threaded Rods (Stud Bolts)
- Size: M24 x 1730mm
- Grade: 8.8
- Standard: DIN 976
- Galvanizing: HDG (Hot-Dip Galvanized by the manufacturer)
- Condition: Full thread, not oversized, chamfered ends
- Quantity: 600 pcs

Hex Nuts
- Size: M24
- Grade: 8.8
- Standard: ISO 4032
- Galvanizing: HDG
- Condition: Not oversized, compatible with M24 rods above
- Quantity: 600 pcs

Washers
- Size: M24
- Standard: DIN 125 or suitable
- Galvanizing: HDG
- Condition: Not oversized
- Quantity: 600 pcs

Hex Bolts
- Size: M30 x 160mm
- Grade: 10.9
- Standard: DIN 931
- Thread: Half Threaded
- Galvanizing: HDG
- Condition: Not oversized, chamfered ends
- Quantity: 200 pcs

Washers
- Size: M30
- Standard: DIN 125
- Galvanizing: HDG
- Condition: Not oversized
- Quantity: 400 pcs

Hex Nuts
- Size: M30
- Grade: 10
- Standard: DIN 934
- Galvanizing: HDG
- Condition: Not oversized, compatible with above bolts
- Quantity: 200 pcs

Hex Bolts
- Size: M30 x 280mm
- Grade: 8.8
- Standard: DIN 931
- Thread: Half Threaded
- Galvanizing: HDG
- Condition: Not oversized, chamfered ends
- Quantity: 200 pcs

Washers
- Size: M30
- Standard: DIN 125
- Galvanizing: HDG
- Condition: Not oversized
- Quantity: 200 pcs

Hex Nuts
- Size: M30
- Grade: 10
- Standard: DIN 934
- Galvanizing: HDG
- Condition: Not oversized, compatible with above bolts
- Quantity: 200 pcs

 

Coupling nuts, similar to DIN 6334, but instead of l=3d, we need lengths 11mm and 15mm.

We need them as fast as possible. We can do partial orders (~3000 pcs shipped ASAP)

~DIN 6334 A4 M 6 x 11 (key size 10) - 10000 pcs

~DIN 6334 A4 M 6 x 15 (key size 10) - 10000 pcs

Nut, Size: 3/4" UNRC, Heavy hex nuts shall be constructed of either Monel 400 (Class A) or Monel 405 (Class B), per ASTM F467, with a minimum proof strength of 70,000 psi (483 N/mm2), Nuts shall have machined threads (UNC) per ANSI B1.1, with Class 2B fit, and shall receive a Mechanical Property Marking of “F 467U” or “F 467V” in accordance with ASTM F468, along with a symbol identifying the manufacturer.

Dryer Parts - Sorp 301Good day. We are seeking a quotation for the manufacture and supply of the following components as per attached drawings and specified materials: 📄 Component List: Item No. Description Steel Grade Weight (kg) 1 Worm Bushing AISI 304H / 0Cr19Ni9 28.5 2 Worm Bushing AISI 304H / 0Cr19Ni9 37 3 Worm Bushing AISI 304H / 0Cr19Ni9 45 4 Worm Bushing AISI 304H / 0Cr19Ni9 33.5 5 Worm Bushing AISI 304H / 0Cr19Ni9 27 6 Worm Bushing AISI 304H / 0Cr19Ni9 33.5 7 Worm Bushing AISI 304H / 0Cr19Ni9 42 8 Worm Bushing AISI 304H / 0Cr19Ni9 47 9 Worm Bushing AISI 304H / 0Cr19Ni9 46.5 10 Worm Bushing AISI 304H / 0Cr19Ni9 41 11 Worm Bushing J92971 (USA) 39 12 Worm Bushing J92971 (USA) 37 13 Shaft AISI 304H / 0Cr19Ni9 1880 14 Sleeve I J92971 (USA) 65.2 15 Sleeve V J92971 (USA) 49 Please include in your quotation: Price per unit (EXW/FOB terms) Manufacturing lead time Material certificates (EN 10204 3.1/3.2 if available) Tolerance and machining standards Surface finish specifications Packing details and dimensions Photos of similar previous work (if available) Please find the attached drawings We would appreciate your prompt reply, as this request is time-sensitive.

04703I01005 Stud Bolt, Size: 1" X 7", Material: CS ASTM A193 Grade B7, rolled threads (UNRC) per ANSI B1.1, Xylan1070 fluoropolymer-coated, Base coat 30Microns+Topcoat 15Microns so total film thickness min of 45 micron, Wrapping or packing of each 10 pieces, Color: Green

Similar sizes accepted, must be A4/A4 material, form B and countersunk head.

our Ref. J096.24 tiranti per Davit 24

Weight per each=34,2g
spring thickness 1,18mm spring lenght 31-33mm
Sizes 35x20x6mm, M8
MATERIAL A2
QUANTITY - 350 000 PCS
 

Screw ISO 14579-M3X60-8.8
Coating : NiP - 5 µm / chem. Nickel (no requirement for phosphorus content specified)
Alternative coating : plain, no surface treatment
RoHS compliant without exemption
Quantity 1.000 pcs

It must be from a European supplier
 

COLLAR, THREADED FOR 1.5/8" BOLT ID: 41.3MM, OD:60MM, LENGTH: 27MM THREAD PER INCH: 8 LENGTH: 948MM BOLT MATERIAL: SA453 GRADE 660 CLASS A 

Proof Pressure Test Certificate (C100) Certificate of Conformity (C600)

HGD ones are an alternative to duplex

Self-Locking Nut, Type: Hexagon, Diameter: M24, Thread: 3MM,

Material: Carbon Steel,

Specification: NF EN ISO 2320

Grade: 8, Standard: NFE 25411,

All-Metal Hexagon Nut Self-Locking Reusable with Two Overlapping Slots, ISO 956-2

YOUR QUOTE MUST INCLUDE: *Resale Price *Lead Time *Shipping Weight *Current P/N *Delivery Terms *Delivery Point *Certificate of Origin or (EUR1) * Please state Tariffs / Fees if applicable *In-Coming Freight (if applicable) *Minimum Order Quantity (If applicable) *Core Charge (If applicable) *Hazardous Material (Yes, No, N/A) *All charges must be disclosed at the time of quote including but not limited to: Inbound Freight, Outbound Freight, Surcharges, Handling Fees, **NOTE OUR SPECIAL STANDARD PACKING: All pallets must be ISPM15 Stamped Heat Treated Lumber; Ply-Wood or Plastic Pallets  Attention: Undisclosed Charges at the time of your quote will not be considered. *We do not accept used or refurbished material.

Please provide best quote for the same asap.

Note: 1. Material to be procured as per Airbus approved source only. 2. Manufacturer COC, Test reports and supplier COC mandatory. 3. Complete traceability documents to be provided. 4. MOQ to be mentioned if applicable.

ABS0112-24-02C-RIVET,BLIND CSK CHERRY 18500

Din 933 Gr.5.8 Plain M24x130 - 720 pieces - urgent delivery needed!

packed in Polybags of 250 pcs.

1 STUD BOLT WITH NUTS, 7/8" X 5" UNC ; GRADE- B7 MATERIAL, ASTM A193, CLASS-2A THREAD. FURNISHED WITH TWO A194, GRADE-2H HEX. NUTS, COARSE THREAD 200 pcs.

2 STUD BOLT WITH NUTS, 7/8" X 8" UNC ; GRADE- B7 MATERIAL, ASTM A193, CLASS-2A THREAD. FURNISHED WITH TWO A194, GRADE-2H HEX. NUTS, COARSE THREAD 100 pcs.

3 STUD BOLT WITH NUTS, 1" X 7-1/4" UNC ; GRADE- B7 MATERIAL, ASTM A193, CLASS-2A THREAD. FURNISHED WITH TWO A194, GRADE-2H HEX. NUTS, COARSE THREAD 160 pcs.

4 STUD BOLT WITH NUTS, 1-1/8" X 7-1/2" UNC ; GRADE- B7 MATERIAL, ASTM A193, CLASS-2A THREAD. FURNISHED WITH TWO A194, GRADE-2H HEX. NUTS, COARSE THREAD 80 pcs.

5 STUDS-BOP FLANGE WITH 2-NUTS, SIZE: 1-1/8'' X 8 120 6 STUDS-BOP FLANGE WITH 2-NUTS, SIZE: 1-3/8'' X 18- 1/2'' 26 pcs.

Quote must include:- • Approximate weight/Dimensions. • Parts origin, OEM /manufacture. • Incase Replacement send datasheet. • Hazardous /non Hazardous Materials. • Delivery/ lead time.

Please let us know your best price and delivery time Thank you for the Support Best regards

Very urgent delivery

Manufacturer or supplier of the following screws. We need items on stock and available

Caterpillar part number: 3808803 Nut insert

SEE ATTACHMENT