Dostawcy Kolki ciagle i dwustronne, seria calowa
Ten produkt podlega następującym normom:
Dane techniczne
Kolki ciagle i dwustronne, seria calowa
Ten produkt podlega następującym normom:
Standard ASME B18.31.2
Norma ASME B18.31.2 obejmuje trzy typy kolków o wy...Informacje zastrzeżone dla zarejestrowanych użytkowników: Zaloguj się | Zarejestruj się i rozpocznij 14 dniowy okres próbny!
| Dimensions in inches (1 inch=25.4 mm) source ASME B18.31.2 2008 table 2 Clamping type studs | ||||||
| d Thread size | Nr. of threads x inch | B Nut end full thread length. min | ||||
| inch | mm | UNC | UNF | L≤ 10 | 10< L≤ 16 | L> 16 |
| 1/4 | 6.35 | 20 | 28 | 0.75 | 1 | 1.5 |
| 5/16 | 7.94 | 18 | 24 | 0.875 | 1.125 | 1.625 |
| 3/8 | ||||||
| 7/16 | ||||||
| 1/2 | ||||||
| 9/16 | ||||||
| 5/8 | ||||||
| 3/4 | ||||||
| 7/8 | ||||||
| 1 | ||||||
| 1-1/8 | ||||||
| 1-1/4 | ||||||
| 1-3/8 | ||||||
| 1-1/2 | ||||||
| 1-5/8 | ||||||
| 1-3/4 | ||||||
| 1-7/8 | ||||||
| 2 | ||||||
| 2-1/4 | ||||||
| 2-1/2 | ||||||
| 2-3/4 | ||||||
| 3 | ||||||
| 3-1/4 | ||||||
| 3-1/2 | ||||||
| 3-3/4 | ||||||
| 4 | ||||||
| Dimensions in inches (1 inch=25.4 mm) source ASME B18.31.2 2008 table 3 Tap end studs (1.5D engagement) | |||||||||
| d Thread size | Nr. of threads x inch | Bm Tap end full thread length. nominal | B Nut end full thread length. min | ||||||
| inch | mm | UNC | UNF | L≤ 10 | 10< L≤ 16 | L> 16 | |||
| 1/4 | 6.35 | 20 | 28 | 0.375 | 0.75 | 1 | 1.5 | ||
| 5/16 | 7.94 | 18 | 24 | 0.469 | 0.875 | 1.125 | 1.625 | ||
| 3/8 | |||||||||
| 7/16 | |||||||||
| 1/2 | |||||||||
| 9/16 | |||||||||
| 5/8 | |||||||||
| 3/4 | |||||||||
| 7/8 | |||||||||
| 1 | |||||||||
| 1-1/8 | |||||||||
| 1-1/4 | |||||||||
| 1-3/8 | |||||||||
| 1-1/2 | |||||||||
| 1-5/8 | |||||||||
| 1-3/4 | |||||||||
| 1-7/8 | |||||||||
| 2 | |||||||||
| 2-1/4 | |||||||||
| 2-1/2 | |||||||||
| 2-3/4 | |||||||||
| 3 | |||||||||
| 3-1/4 | |||||||||
| 3-1/2 | |||||||||
| 3-3/4 | |||||||||
| 4 | |||||||||
Szczegóły
Kolki ciagle i dwustronne, seria calowa
|
Dimensions in inches (1 inch=25.4 mm) source ASME B18.31.2 2008 table 2 Clamping type studs |
||||||
|
d Thread size
|
Nr. of threads x inch |
B Nut end full thread length. min | ||||
| inch | mm | UNC | UNF | L≤ 10 | 10< L≤ 16 | L> 16 |
|
1/4
|
6.35 | 20 | 28 | 0.75 | 1 | 1.5 |
|
5/16
|
7.94 | 18 | 24 | 0.875 | 1.125 | 1.625 |
|
3/8
|
9.53 | 16 | 24 | 1 | 1.25 | 1.75 |
|
7/16
|
11.11 | 14 | 20 | 1.125 | 1.375 | 1.875 |
|
1/2
|
12.70 | 13 | 20 | 1.25 | 1.5 | 2 |
|
9/16
|
14.29 | 12 | 18 | 1.375 | 1.625 | 2.125 |
|
5/8
|
15.88 | 11 | 18 | 1.5 | 1.75 | 2.25 |
|
3/4
|
19.05 | 10 | 16 | 1.75 | 2 | 2.5 |
|
7/8
|
22.23 | 9 | 14 | 2 | 2.25 | 2.75 |
|
1
|
25.40 | 8 | 12 | 2.25 | 2.5 | 3 |
| 1-1/8 | 28.58 | 7 | 12 | 2.5 | 2.75 | 3.25 |
| 1-1/4 | 31.75 | 7 | 12 | 2.75 | 3 | 3.5 |
| 1-3/8 | 34.93 | 6 | 12 | 3 | 3.25 | 3.75 |
| 1-1/2 | 38.10 | 6 | 12 | 3.25 | 3.5 | 4 |
| 1-5/8 | 41.28 | - | - | 3.5 | 3.75 | 4.25 |
| 1-3/4 | 44.45 | 5 | - | 3.75 | 4 | 4.5 |
| 1-7/8 | 47.63 | - | - | 4 | 4.25 | 4.75 |
| 2 | 50.80 | 4.5 | - | 4.25 | 4.5 | 5 |
| 2-1/4 | 57.15 | 4.5 | - | 4.75 | 5 | 5.5 |
| 2-1/2 | 63.50 | 4 | - | 5.25 | 5.5 | 6 |
| 2-3/4 | 69.85 | 4 | - | 5.75 | 6 | 6.5 |
| 3 | 76.20 | 4 | - | - | 6.5 | 7 |
| 3-1/4 | 82.55 | 4 | - | - | 7 | 7.5 |
| 3-1/2 | 88.90 | 4 | - | - | 7.5 | 8 |
| 3-3/4 | 95.25 | 4 | - | - | 8 | 8.5 |
| 4 | 101.6 | 4 | - | - | 8.5 | 9 |
|
Dimensions in inches (1 inch=25.4 mm) source ASME B18.31.2 2008 table 3 Tap end studs (1.5D engagement) |
|||||||||
|
d Thread size
|
Nr. of threads x inch |
Bm Tap end full thread length. nominal |
B Nut end full thread length. min | ||||||
| inch | mm | UNC | UNF | L≤ 10 | 10< L≤ 16 | L> 16 | |||
|
1/4
|
6.35 | 20 | 28 | 0.375 | 0.75 | 1 | 1.5 | ||
|
5/16
|
7.94 | 18 | 24 | 0.469 | 0.875 | 1.125 | 1.625 | ||
|
3/8
|
9.53 | 16 | 24 | 0.563 | 1 | 1.25 | 1.75 | ||
|
7/16
|
11.11 | 14 | 20 | 0.656 | 1.125 | 1.375 | 1.875 | ||
|
1/2
|
12.70 | 13 | 20 | 0.75 | 1.25 | 1.5 | 2 | ||
|
9/16
|
14.29 | 12 | 18 | 0.844 | 1.375 | 1.625 | 2.125 | ||
|
5/8
|
15.88 | 11 | 18 | 0.938 | 1.5 | 1.75 | 2.25 | ||
|
3/4
|
19.05 | 10 | 16 | 1.125 | 1.75 | 2 | 2.5 | ||
|
7/8
|
22.23 | 9 | 14 | 1.313 | 2 | 2.25 | 2.75 | ||
|
1
|
25.40 | 8 | 12 | 1.5 | 2.25 | 2.5 | 3 | ||
| 1-1/8 | 28.58 | 7 | 12 | 1.688 | 2.5 | 2.75 | 3.25 | ||
| 1-1/4 | 31.75 | 7 | 12 | 1.875 | 2.75 | 3 | 3.5 | ||
| 1-3/8 | 34.93 | 6 | 12 | 2.063 | 3 | 3.25 | 3.75 | ||
| 1-1/2 | 38.10 | 6 | 12 | 2.25 | 3.25 | 3.5 | 4 | ||
| 1-5/8 | 41.28 | - | - | 2.438 | 3.5 | 3.75 | 4.25 | ||
| 1-3/4 | 44.45 | 5 | - | 2.625 | 3.75 | 4 | 4.5 | ||
| 1-7/8 | 47.63 | - | - | 2.813 | 4 | 4.25 | 4.75 | ||
| 2 | 50.80 | 4.5 | - | 3 | 4.25 | 4.5 | 5 | ||
| 2-1/4 | 57.15 | 4.5 | - | 3.375 | 4.75 | 5 | 5.5 | ||
| 2-1/2 | 63.50 | 4 | - | 3.75 | 5.25 | 5.5 | 6 | ||
| 2-3/4 | 69.85 | 4 | - | 4.125 | 5.75 | 6 | 6.5 | ||
| 3 | 76.20 | 4 | - | 4.5 | - | 6.5 | 7 | ||
| 3-1/4 | 82.55 | 4 | - | 4.875 | - | 7 | 7.5 | ||
| 3-1/2 | 88.90 | 4 | - | 5.25 | - | 7.5 | 8 | ||
| 3-3/4 | 95.25 | 4 | - | 5.625 | - | 8 | 8.5 | ||
| 4 | 101.6 | 4 | - | 6 | - | 8.5 | 9 | ||
Pełna lista dostawców Kolki ciagle i dwustronne, seria calowa
Founded in 1969, Buora D.P.U. is a distributor certified following ISO 9001.
The company offers the complete range of high strength fasteners, ready on stock, both coarse and fine pitches with metric and inch threads.
Distributor of prestigious brands such as UNBRAKO and NORD-LOCK, for Buora D.P.U. the service always comes first, therefore there is not minimum quantity required.
Distributor of inch sized fasteners, oil and gas fasteners and turned special screws
Manufacturer of studs and allthreads, sizes from 4mm up to 36mm (3/16' TO 1 ½') diameter and from 15MM up to 1 meter in length.
International manufacturer of high quality fixings and fasteners, active since 50 years. We have a variety of nuts, bolts, washers, screws, threaded bars, clamps, rivets, wire ropes, nails and raw material in M.S. S.S 316, 304 grades and brass.
Leader in the forged steel structural hardware industry: stud bolts, nuts, eye bolts, turnbuckles
Distributor of fasteners for the industrial distribution market. We aim to create the best customer experience possible by putting our customers’ needs first. With a wide range of products and services, we provide customers with more options, making managing their fastener program easier.
Manufacturer of threaded rods and bars, anchor bolts. Both metric and inch sizes
Manufacturing of special fasteners and machined (inconel, monel, super duplex, hastelloy, titanium, nimonic, B16 and Durehete)
Manufacturing, stocking and distributing petro-chemical grade studbolt assemblies and fasteners.
Manufacturer of special cold and hot forged nuts and bolts: Metric, UNF, UNC, BSF & BSW (Whitworth) threadforms
Manufacturer of double-end studs, wheel bolts, screws and nuts for automotive, agricultural, road-building machinery and industrial sectors.
Special pieces according to costumers requirements.
Qualities: 8.8, 10.9, 12.9, G5&G8. Pieces manufacture by cold forging, diameters from 5mm to 22mm (¼” to ?”).
Metallographic Laboratory in our facilities.
ISO 9001 Certificate.
Manufacturer of thread rods , stud bolts , nuts and coach screw and leading trader of bolts, anchors, washers, and steel profile. Our products range include class 4.8, 6.8, 8.8, 10.9, 12.9, B7, 2H, A2, A4, size from M3 to M64
Manufacturer of inch bolts, nuts and stud bolts. Diameter from 3/4″ up to 26″ and lenghts from 1″ up to 36″
Manufacturer of Threaded Rods, Studs, Special Bent Bolts
Spade Bolts, Continuous Threaded Acme Bars, inch sizes, for North American market