Suppliers of Wire and rods for oil and gas fasteners (ASTM A193, 194, A320)
Technical data
Wire and rods for oil and gas fasteners (ASTM A193, 194, A320)
This product is regulated by the following standards:
Details
Wire and rods for oil and gas fasteners (ASTM A193, 194, A320)
|
Dati Tecnici/Technical Data/Technische Daten/Donné/Datos:
|
||||||||||||||||||||||
 |
||||||||||||||||||||||
| ASTM A193 - A320 | Chemical requirements (Composition. percent) | |||||||||||||||||||||
| ALLOY | ASTM | AISI | UNS | W.-Nr. | Dia. | Tensile strength min. MPa | Yeld Strength min.0.2% MPa | Elongation in 4 D. min.% | Reduction of area min.% | HB | C | Mn max | P max | S max | Si max | Cr | Ni | Mo | V | Ti | Al max | Cb+Ta |
| B5 | A193 | 501 | S50100 | 1.7362 | up to 4.incl | 690 | 550 | 16 | 50 | - | 0.10 min | 1.00 | 0.04 | 0.03 | 1.00 | 4.00-6.00 | - | 0.40-0.65 | - | - | - | - |
| B6 | A193 | 410 | S41000 | 1.4006 | up to 4.incl | 760 | 585 | 15 | 50 | - | 0.15 min | 1.00 | 0.04 | 0.03 | 1.00 | 11.5-13.5 | - | - | - | - | - | - |
| B7 | A193 | 4140 | G41400 | 1.7225 | 21/2 and under | 860 | 720 | 16 | 50 | <321 | 0.37-0.49 | 0.65-1.10 | 0.04 | 0.04 | 0.15-0.35 | 0.80-1.15 | - | 0.50-0.65 | 0.25-0.35 | - | 0.015 | - |
| over 21/2 to 4 | 795 | 655 | 16 | <302 | ||||||||||||||||||
| over 4 to 7 | 690 | 515 | 18 | <277 | ||||||||||||||||||
| B7 M | A193 | 4140 | G41400 | 1.7225 | 21/2 and under | 690 | 18 | 50 | <235 | 0.37-0.49 | 0.65-1.10 | 0.04 | 0.04 | 0.15-0.35 | 0.80-1.15 | - | 0.50-0.65 | 0.25-0.35 | - | 0.015 | - | |
| over 21/2 to 4 | ||||||||||||||||||||||
| over 4 to 7 | ||||||||||||||||||||||
| L7 | A320 | 4140 | G41400 | 1.7225 | 21/2 and under | 860 | 725 | 16 | 50 | <235 | 0.38-0.48 | 0.75-1.00 | 0.04 | 0.04 | 0.15-0.35 | 0.80-1.10 | - | 0.15-0.25 | - | - | - | - |
| L7M | A320 | 4140 | G41400 | 1.7225 | all size | 690 | 550 | 18 | 50 | 0.38-0.48 | 0.75-1.00 | 0.04 | 0.04 | 0.15-0.35 | 0.80-1.10 | - | 0.15-0.25 | - | - | - | - | |
| L43 | A320 | 4340 | G43400 | 1.6565 | 4 and under | 860 | 725 | 16 | 50 | 0.38-0.43 | 0.60-0.85 | 0.04 | 0.04 | 0.15-0.35 | 0.70-0.90 | 1.65-2.00 | 2.0-3.0 | - | - | - | - | |
| B8 | A193 | 304 | S30400 | 1.4301 | all size | 515 | 205 | 30 | 50 | <223 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 18.0-20.0 | 8.0-11.0 | - | - | - | - | - |
| A320 | 35 | |||||||||||||||||||||
| B8A | A193 | 304 | S30400 | 1.4301 | all size | 515 | 205 | 30 | 50 | <192 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 18.0-20.0 | 8.0-11.0 | - | - | - | - | - |
| A320 | 35 | |||||||||||||||||||||
| B8T | A193 | 321 | S32100 | 1.4541 | all size | 515 | 205 | 30 | 50 | <223 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | - | - | 5xC min | - | - |
| A320 | 35 | |||||||||||||||||||||
| B8TA | A193 | 321 | S32100 | 1.4541 | all size | 515 | 205 | 30 | 50 | <192 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | - | - | 5xC min | - | - |
| A320 | 35 | |||||||||||||||||||||
| B8C | A193 | 347 | S34700 | 1.4550 | all size | 515 | 205 | 30 | 50 | <223 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | - | - | - | - | 10xC min |
| A320 | 35 | |||||||||||||||||||||
| B8CA | A193 | 347 | S34700 | 1.4550 | all size | 515 | 205 | 30 | 50 | <192 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | - | - | - | - | 10xC min |
| A320 | 35 | |||||||||||||||||||||
| B8M | A193 | 316 | S31600 | 1.4401 | all size | 515 | 205 | 30 | 50 | <223 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - |
| A320 | 35 | |||||||||||||||||||||
| B8MA | A193 | 316 | S31600 | 1.4401 | all size | 515 | 205 | 30 | 50 | <192 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - |
| A320 | 35 | |||||||||||||||||||||
| B8cl2 | A193 | 304 | S30400 | 1.4301 | 3/4 and under | 860 | 690 | 12 | 35 | <321 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 18.0-20.0 | 8.0-11.0 | - | - | - | - | - |
| A320 | ||||||||||||||||||||||
| B8Tcl2 | A193 | 321 | S32100 | 1.4541 | over 3/4 to 1 | 795 | 550 | 15 | 35 | <321 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | - | - | 5xC min | - | - |
| A320 | 725 | 450 | 20 | |||||||||||||||||||
| B8Ccl2 | A193 | 347 | S34700 | 1.4550 | over 1 to 11/4 | 725 | 450 | 20 | 35 | <321 | 0.08 max | 2.00 | 0.05 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | - | - | - | - | 10xC min |
| A320 | 795 | 550 | 15 | |||||||||||||||||||
| A193 | 347 | S34700 | 1.4550 | over 11/4 to 11/2 | 690 | 345 | 28 | 45 | ||||||||||||||
| A320 | ||||||||||||||||||||||
| B8Mcl2 | A193 | 316 | S31600 | 1.4401 | 3/4 and under | 760 | 665 | 15 | 45 | <321 | 0.08 max | 2.00 | 0.05 | 0.03 |
1.00 |
16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - |
| A320 | ||||||||||||||||||||||
| A193 | 316 | S31600 | 1.4401 | over 3/4 to 1 | 690 | 550 | 20 | |||||||||||||||
| A320 | ||||||||||||||||||||||
| A193 | 316 | S31600 | 1.4401 | over 1 to 11/4 | 655 | 450 | 25 | |||||||||||||||
| A320 | ||||||||||||||||||||||
| A193 | 316 | S31600 | 1.4401 | over 11/4 to 11/2 | 620 | 345 | 30 | |||||||||||||||
| A320 | ||||||||||||||||||||||
| B8Mcl2B | A193 | 316 | S31600 | 1.4401 | 2 and under | 655 | 515 | 25 | 40 | <321 | ||||||||||||
| over 2 to 21/2 | 620 | 450 | 30 | |||||||||||||||||||
| over 21/2 to 3 | 550 | 380 | 30 | |||||||||||||||||||
| B8Mcl2C | A193 | 316 | S31600 | 1.4401 | 2 and under | 585 | 450 | 30 | 60 | <321 | ||||||||||||
| over 2 | 585 | 415 | 30 | |||||||||||||||||||
| ASTM A 194 | Chemical requirements (Composition. percent) | |||||||||||||||||||||
| ALLOY | ASTM | AISI | UNS | W.-Nr. | Dia. | HB | HRC | HRB | C | Mn max | P max | S max | Si max | Cr | Ni | Mo | V | Ti | Al max | Cb+Ta | ||
| 2 | A194 | 1040 | K04002 | 1.1191 | all size | 159 to 327 | - | - | 0.40 min | 1.00 | 0.04 | 0.05 | 0.40 | - | - | - | - | - | - | - | ||
| 2H | A194 | 1040 | K04002 | 1.1191 | 11/2 and under | 248 to 327 | 24 to 28 | - | ||||||||||||||
| over 11/2 | 212 to 327 | 38 max | 95 min | |||||||||||||||||||
| 2HM | A194 | 1040 | K04002 | 1.1191 | all size | 159 to 327 | 22 max | - | ||||||||||||||
| 4L | A194 | - | K14510 | - | all size | 248 to 327 | 24 to 38 | - | 0.40 - 0.50 | 0.70 - 0.90 | 0.035 | 0.04 | 0.15 - 0.35 | - | - | 0.20 - 0.30 | - | - | - | - | ||
| 3 | A194 | 501 | S50100 | 1.7362 | all size | 248 to 327 | 24 to 38 | - | 0.10 min | 1.00 | 0.04 | 0.03 | 1.00 | 4.0 - 6.0 | - | 0.40 - 0.65 | - | - | - | - | ||
| 6 | A194 | 410 | S41000 | 1.4006 | all size | 228 to 271 | 20 to 28 | - | 0.15 max | 1.00 | 0.04 | 0.03 | 1.00 | 11.5 - 13.5 | - | - | ||||||
Full list of Suppliers of Wire and rods for oil and gas fasteners (ASTM A193, 194, A320)
Resistant Metal Alloys LLP is an exclusive Brand name for High Precision Build Fasteners in High Tensile, Corrosion Resistant Alloys, High Performance Alloys, Rare Exotic Alloys, Marine Alloys & ASTM / ASME Fasteners.
It is engaged in manufacturing, stock holding and outsourcing Industrial Fasteners & providing traditional and customised fastening solutions globally!
Manufacturer of drawn wire coils, wire rods and bars.
Materials: Stainless steels, super stainless steels, nickel alloys, superalloys and titanium.
Manufacturer of nickel alloy wire, bars and wire rope (Inconel, Hastelloy, Incoloy, Titanium, Duplex, Super Duplex, Stainless steel)
Distributor of high-quality metals and special alloys, non-ferrous metals, rare alloys
Manufacturer of raw material in titanium, zirconium and nickel. ASTM and ASM norms.
Manufacturer of stainless steel, duplex and super alloys: tubes, pipes, plates, sheets, coils, strips, bars and rods
Manufacturer of stainless steel and superalloys.
Forged products, Semifinished products, Bars, Wire rod, Bright Steel, fien wire
Manufacturer of special profiles and drawn bars in stainless steel and superalloys
Stockholder of raw materail: bars, plates, tubes in steel, stainless steel, nickel and superalloys
Manufacturer of stainless steel mill: billets & hot rolled bars, bright bars, angles, flats & xhannels, wires, flanges & fittings, seamless tubes & pipes
ISO-9001:2008 certified premium Stainless and Alloy Steel Bright Bar manufacturing company in Round, Square, Hex and drawn Flat profiles.
We specialize in B8/B8M Class 1 and Class2 material, Valve steel including 17-4PH, 4104+Mo and all austenitic, martensitic and ferritic grades duly QT-800 processed.
Manufacturer of steel and stainless stee:wire rod, bars, wire, strips, pipes, sheets.
Distributor of steel: ball and roller bearing steel, quenched and tempered steel, bright steel, ASTM qualities, stainless and acid-resistant steels
Manufacturer of fasteners and raw materials for the oil industry, titanium, Duplex, Super duplex, ASTM F593, F594, A193, A194 / ASME SF593, F594, SA193, SA194
Importer and exporter of sheet, plates, coils, pipes, rods, wire in stainless steel, alloy steel, carbon steel and non ferrous metal
Manufacturer and exporter of stainless steel, carbon steel brass, titanium and super alloys. Distributor of fasteners.
Manufacturer of bright engineering steel bar and wire for the fastener industry and cold forming applications. Materials: Mild Steels (including Boron and / or Manganese), Carbon Steels, Stainless & Nickel Alloys, Alloy Steels.
Distributor of wire, rods and sheet in special steel, stainless steel and superalloys
Wholesaler, distributor, importer and exporter of bars, tubes, plates and flanges in stainless steel and superalloys
Manufacturer and stockholder of cold-drawn stainless steel and nickel alloy bars, stockholder of 1.4003 sheet and plate
India-based manufacturer of Nickel-based Super alloys, Duplex, Super-duplex and Super-austenitic stainless steel bars.
The company holds ISO 9001:2008 (TUV-NORD), PED 97/23/EC (DNV) and NORSOK M-650 (DNV) certifications.
Manufacturer of sheet metal, strips, rods and wires in nickel, cobalt and zirconium alloys as well as high alloyed special stainless steels
Distributor of bars, tubes, wire rods, pipes in aluminium, steel, stainless steel, etc..